Metal recycling is made possible by a commonly used refrigerant

Metals and Mining Review | Friday, November 20, 2026

Rare earth elements and transition metals can be separated selectively using a technology developed for water treatment.

FREMONT, CA: In nature, rare earth metals tend to occur in low concentrations and can be difficult to separate from each other because they are chemically similar. Wind turbines, electric car motors, and computer hard drives use them. With high melting points and unique structural properties, transition metals are excellent thermal and electrical conductors, essential for producing common alloys such as steel, copper, and lithium-ion batteries.

Unlike traditional methods, which typically use hundreds of degrees Celsius, dimethyl ether-driven methods use significantly less energy and pressure. Approximately five atmospheres of pressure are needed for fractional crystallization to occur at ambient temperatures. Comparatively, an unopened 12-ounce soda can has 3.5 atmospheres of pressure. In addition to saving money, lower energy and pressure requirements reduce operating costs.

Stay ahead of the industry with exclusive feature stories on the top companies, expert insights and the latest news delivered straight to your inbox. Subscribe today.

Competing technologies also use chemical "reagents" to drive precipitation and other separation processes, which result in additional waste products with financial and environmental consequences. With fractional crystallization based on dimethyl ether, this is not the case.

The team developed the zero-waste solvent-based metal recovery process by incorporating electrochemical rare earth metal recovery processes already in place at INL. An example is E-RECOV, which enables electronic waste to be recovered efficiently through an electrochemical cell. Critical material recovery can also be made more sustainable by reducing energy intensity and waste profile.

 

More in News

Accidents with significant consequences can occur in a moment of carelessness. Mining is a dangerous occupation. A man was murdered earlier this year in an accident at an Australian copper mine. Another 22 people got killed in a coal mine disaster in southwest China. In truth, China has some of the world's most hazardous mines, and officials have raced to enforce safety regulations. If you're thinking about a career in mining, you should take the following precautions to make your stay in the mines as safe as possible. • Don't Ignore the Risk The first step in keeping oneself safe is to be aware that working in mining is dangerous. Accept that the mining sector is risky, and stay attentive to the work. Keep an eye out for the coworkers, and never let their guard down. Accidents with significant consequences can occur in a moment of carelessness. • Dangerous Tasks Require Planning and Communication When planning projects, don't just worry about doing them as quickly as feasible. Make additional time and money available for safety needs. Never risk company employees' safety to fulfill deadlines or improve job quality. All hazards, including the probability of accidents, should be considered. Attempt to remove as many dangers as feasible. If risk remains, give the staff explicit instructions and educate them on how to reduce it. Deal with any threat that may develop if required. • Enroll in Professional Training Every member of the team should get frequent safety training. This should not be limited to new team members. Even long-term employees should be required to take refresher training. Safety training programs that combine theory and practice may be quite beneficial. Workers who take on physically demanding positions may be sent for health and fitness exams to assess their ability to handle the physical demands of their job. • Always Wear Safety Equipment Mining employees are protected by many safety equipment, from helmets to safety glasses and gloves. All personnel must wear the proper safety equipment at all times. For example, several reports of workers being saved by helmets. • Keep a record of your safety procedures When an accident occurs, all team members should know what to do. Procedures for safety must be well specified. Describe the numerous situations that may arise, what has to be done, and who to call when recording the safety protocols. Safety protocols should be widely publicized in areas where team members may access them quickly. ...Read more
Many mining companies increase their teams' safety quality by giving the new workers intensive safety training. Mining is the largest industry worldwide, providing significant mineral resources used in critical products worldwide. The profession's hands-on methods come with its own set of risks and threats. Mining safety must be at the center of any operation involving deep drilling, blasting, or potentially risky jobs. What is mining safety? Any efforts taken to improve a mining team's well-being and guarantee that they can work as safely, responsibly, and efficiently as possible were considered mining safety. The essential aspects to view at a mine site are health, safety, and the environment (HSE). The best part is that the number of fatalities each year has dropped dramatically in recent years. This is partly due to new technologies and stringent safety rules that promote safer processes and surroundings. There is still a slew of indirect issues that can have a direct effect on mine site safety. Thus monitoring and awareness are as critical as ever. Factors Affecting Mining Safety in 2021 Mining Labor Shortages Due to the highly cyclical nature of mining and the high retirement rates among experienced workers, there are instances when interest does not match labor requirements. The scarcity of trained employees can have a significant impact on a project team's safety. It's critical to engage with an experienced workforce supplier with a talent pool large enough to endure global labor shortages during these labor scarcities that eventually happen due to the ebb and flow of industry demand. Proper Implementation of Mine Safety Appliances It's one thing to have innovative, sophisticated safety management systems and advanced processes in place to reduce mining dangers. It is quite another to ensure that they're correctly integrated across the project's life cycle. Each day, protocols must be followed continuously – from executives and engineers to crews, every team member must thoroughly incorporate new safety practices into their everyday schedule and keep one another accountable. Complacency and Culture When people do anything several times, it becomes automatic, and they begin to pay less attention as you go along. The problem is that in mining, it only takes one careless error to put an entire team's safety at risk. It is just not an option to be complacent. The attitude of the team must include vigilance. Security must constantly be on the mind, especially throughout busy shifts or when the unit is fighting exhaustion, from comprehensive risk assessments and documenting every near-miss to noting all potential dangers. ...Read more
Electrical connectors and wiring must be able to withstand enormous amounts of power at once; however, most metals cannot bend easily. Copper has been the preferred material for electrical connectors for about 200 years. It has become even more prevalent since the discovery of the electromagnet and telegraph in the early 1800s, especially after the introduction of the telephone in 1876. Telecommunications, power generation, distribution, and transmission all employ copper electrical connectors today. The power source must overcome resistance for an electrical current to flow through metals. A metal's electrical conductivity increases as its resistance decreases, and copper wire is also an excellent electrical conductor due to its low resistance. Copper is also a very adaptable material. Electrical connectors and wiring must be able to withstand enormous amounts of power at once; however, most metals cannot bend easily. On the other hand, copper has the perfect thickness for handling home electrical levels while remaining movable. Finally, copper has a lower oxidation rate than other metals. When it comes to rust, you've probably heard about oxidation. It occurs when oxygen and moisture in the air react with the surface of a metal. This process causes the metal to corrode, resulting in a film-like covering. Copper does not rust but does develop a greenish patina known as copper oxide. This covering, unlike rust, protects the metal from corrosion while not interfering with conductivity. What are the Best Copper Electrical Connectors Practices? Electrical copper connectors have fewer safety concerns than aluminum connectors, yet electricity is still dangerous. So, if one is working on a wiring job, make sure to take the necessary safety precautions. When using copper electrical conductors, make careful to follow these guidelines: Use a copper wire connector that is appropriate for the size and number of wires one is connecting. Use only UL (Underwriters Laboratories)-approved electrical copper connectors. Make sure the connector completely covers the wire ends. Covering exposed wiring with electrical tape is not a safe option. It is likely that the ends of the wires will be damaged while rejoining them. To provide the safest connection possible, trim the ends and re-strip the insulation. ...Read more
Steel is one of the most widely used metals on the planet, having been used to construct everything from the world's tallest skyscrapers to everyday kitchen utensils. Steel fueled technological advancement and growth throughout the Industrial Age and continues to do so today. All forms of steel are recyclable, but the method for steel recycling is unique compared to the recycling processes for other materials. Steel goods will be sold to a scrapyard instead of being disposed of in a landfill or a regular recycling facility because of the steel's inherent value. Home Scrap, Prompt or Industrial Scrap, and Obsolete Scrapare the three forms of steel scrap sold for scrapping yards. Steel mills generate a lot of steel waste throughout the manufacturing process, and this debris is known as "home scrap." Included in this category are steel trims and scraps that are rejected. This usually is not necessary to gather or purchase, as it is returned to the furnace. During the production process of things such as automobiles and appliances, prompt scrap is generated. Scrap purchasers pay a premium for the excess steel in these warehouses and industries. Remaining steel waste, such as household equipment, junked autos, and office and residential trash, are all examples of obsolete scrap. Also included in this category are abandoned constructions that have been taken to a junkyard for their metal components. A designated drop-off facility or buyback center collects steel scrap, which is subsequently sorted and supplied to mills and foundries. The extra steel scrap is then melted down in a furnace operating at approximately 3,000 degrees and filtered to remove any impurities from the finished product. After the steel has been melted, it is solidified and packaged for transportation. The newly recycled metal is then sent to various manufacturers as raw material, and the cycle continues. There are many varieties of steel in steel-based items, and stainless steel is the most popular. Steel is distinguished from stainless steel by its magnetic characteristics. On the other hand, stainless steel is entirely magnetic, unlike steel, which has a substantial magnetic field. Ferrous metals contain iron and hence have magnetic qualities; nonferrous metals do not. Steel has these properties because it contains iron, and stainless steel does not contain iron and therefore does not have these magnetic properties. Stainless steel has a higher melting point than conventional steel, making it resistant to corrosion and easier to work with. Due to the wide range of applications, it is utilized in healthcare, food manufacturing, cars, and building projects. Hangers and other home items made of steel, on the other hand, are more common. While both steel and stainless steel are recyclable, it is still beneficial to separate them due to the potential price and ultimate value difference. ...Read more